|
Sheets/Rolls General Information |
|
|
|
|
Written by Administrator
|
|
Sunday, 14 August 2005 |
To use GRP profiles correctly and avoid any accident or damage to the material, it is advisable to follow a number of recommendations, applicable in all conditions.
|
• Use at temperatures between -40°C and +140°C.
• Use appropriate gangways to walk on the laminates (which cannot be walked on).
• Always fasten on top of the profile rib/corrugation.
• Always handle taking suitable accident-prevention measures.
• Do not handle in strong winds.
• Cut preferably with diamond blades, etc. and use tools that can make neat holes.
• Lift and lay the profiles in compliance with the enforced regulations.
• Keep away from flames and sparks.
• Do not expose packed material to bad weather.
• Store raised off the ground.
• Where possible, store vertically.
• Tie down when exposed to bad weather.
• Repair any break and/or hole with resin and fibreglass.
• Do not clean with products unsuitable for FRP. |  |
|
|
Last Updated ( Sunday, 04 September 2005 )
|
Roofing Sheets/Rolls
